Follow

Verbose Screen Logging to troubleshoot Boot Issues

If your system is having an issue during the boot process you can change the screen logging level to Verbose to allow for further troubleshooting.

 

  1. Boot with rescue mode

You need to press "Tab" button at the screen where you choose 32/64 bit mode or RUN SOFTWARE INSTALLER :

     2. To verify what causes the freeze during boot up, modify the line that contains :

splash = silent 

you need to change to :

splash=verbose

Then hit ENTER to boot up. The result should look like this :

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Powered by Zendesk